- whatsapp +51955515985
- support@ecuforcetruck.com
- 24/7 Customer Support
Menu
Shop
Account
Subtotal: $0.00
No products in the cart.
Circuit Description
The aftertreatment system is monitored by temperature sensors that are located in the exhaust system. The aftertreatment diesel oxidation catalyst intake temperature sensor is located after the turbocharger outlet. The aftertreatment diesel particulate filter intake temperature sensor is located between the aftertreatment catalyst and the aftertreatment particulate filter. The aftertreatment diesel particulate filter outlet temperature sensor is located after the aftertreatment particulate filter. These sensors monitor the temperatures in the aftertreatment system and determine if the aftertreatment catalyst is missing.
Component Location
The aftertreatment catalyst is located in the exhaust system. The location of the catalyst can vary depending on the original equipment manufacturer (OEM). Refer to the OEM service manual.
Conditions for Running the Diagnostics
This diagnostic runs when the aftertreatment system is being actively regenerated to reduce soot in the aftertreatment diesel particulate filter. The diagnostic checks for a temperature increase across the catalyst during an active regeneration of the aftertreatment system to detect the presence of the catalyst.
Conditions for Setting the Fault Codes
The electronic control module (ECM) detects that the aftertreatment diesel oxidation catalyst intake temperature sensor and the aftertreatment diesel particulate filter intake temperature sensor are reading the same temperature during an active regeneration of the aftertreatment system.
Action Taken When the Fault Code is Active
The ECM illuminates the amber CHECK ENGINE lamp and/or Malfunction Indicator Lamp (MIL) immediately when the diagnostic runs and fails on two consecutive trips.
Active and stationary regeneration of the diesel particulate filter will be disabled.
The EGR valve will be closed.
Engine torque will be reduced if the engine is operated for an extended period of time with this fault active.
Conditions for Clearing the Fault Code
To validate the repair, perform INSITE? electronic service tool Aftertreatment Diesel Particulate Filter Regeneration Test.
The fault code status displayed by INSITE? electronic service tool will change to INACTIVE immediately after the diagnostic runs and passes.
The ECM will turn off the amber CHECK ENGINE lamp after the diagnostic runs and passes.
For OBD engines, the ECM will turn off the MIL after 3 consecutive trips where the diagnostic runs and passes.
The ?Reset All Faults? command in INSITE? electronic service tool can be used to clear active and inactive faults, as well as the MIL for OBD applications
Shop Talk
This fault code becomes active when the aftertreatment diesel oxidation catalyst intake and aftertreatment diesel particulate filter intake temperature sensors do not detect the presence of a catalyst in the aftertreatment system.
Possible causes of this fault code include:
Tampering with the catalyst system
Removing the catalyst system from the vehicle
A damaged catalyst.
The type of diesel exhaust fluid tank temperature and level sensor used can vary depending on the vehicle OEM. As a result, the physical and/or electrical sensor configuration may vary slightly from what is shown in the troubleshooting and wiring diagram information.
Reference the appropriate OEM wiring diagram when troubleshooting circuits that utilize wiring supplied by the OEM.
For intermittent power supply and datalink communication issues with Aftertreatment Components, it is highly recommended that the OEM Power Distribution Center fuses and relays be thoroughly checked for loose, missing or intermittent connections.
Possible Cause:
1) Aftertreatment Injector failure
2) ECM calibration
Related
Categories Cumminz, DTC TRUCKS, ISX15 CM2250 (2010-12)Tags 1664, 2010-12, 31, 380, 4796, Aftertreatment, Catalyst, CM2250, Code, Condition, Cummins, Diesel, Exists, Fault, FMI, ISX15, Missing-, oxidation, PID, SID, SPN
Wiring Diagrams
Component Locators
- Diesel Diagnostic Link 8.17 SP1 2023
Detroit$96.00
Rated 0 out of 5
- VOLVO PTT TECH TOOL 2.8.220 2023 Last version 1pc
Trucks software$200.00
Rated 0 out of 5
- NEXIQ eTechnician 2.1.7657.26963 + Patch 2020
Allison$60.00
Rated 0 out of 5
- JPRO 2023 v3 diagnostic software latest version
JPRO$100.00
Rated 0 out of 5
- Perkins SPI2 2018A Dealer Parts and Service
Perkins$50.00
Rated 0 out of 5
- Cumminmms Insiter 8.9 Diagnostic Software
cummisznn$80.00
Rated 0 out of 5
- Allison doc premium update 2023 v1 Diagnostic Software Download
Allison$96.00
Rated 0 out of 5
- Cumming Caltem 5.9.1 2022 ( 1 PC )
cummisznn$78.00
Rated 0 out of 5
- CATERPILLAR FLASH FILE 2021 74 GB ( Collection 2021 ) sofware trucks
CAT$55.00
Rated 0 out of 5
- Noregon JPRO Commercial Fleet Diagnostics 2017 v3
JPRO$35.00
Rated 0 out of 5
- Meritor WABCO Toolbox 12.12 Software
Trucks software$40.00
Rated 0 out of 5
- download MANCATS II v14.01 2014 Diagnostic software MAN CATS ( virtual machine )
MAN$75.00
Rated 0 out of 5
- Hino Diagnostic eXplorer 2 – Hino DX2 v1.1.21.4 with keygen unlocked ( Hino trucks )
Hino$60.00
Rated 0 out of 5
John Deere$120.00
Rated 0 out of 5
- Wabco ToolBox plus 13.7.0.1 + ECAS CAN2 v3.00 Diagnostics Software
Trucks software$84.00
Rated 0 out of 5
- JPRO Diagnostic Software Download 2024
JPRO$100.00
Rated 0 out of 5
- Detroit Diesel Diagnostic Link DDDL 6.50 ( software trucks )
Detroit$20.00
Rated 0 out of 5
- JOHN DEERE SERVICE ADVISOR 5.3.225 DATABASE AG + CF ENGLISH 2023
John Deere$250.00
Rated 0 out of 5
- DOWNLOAD VOLVO MATRIS 2.3.3
Trucks software$60.00
Rated 0 out of 5
- Detroit BackDoor Password Generator V1 V2
Detroit$30.00
Rated 0 out of 5
Related products
- Bendix ABS EC-30 Fault Code: SID 251 FMI 3
Bendix ABS
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
- SERVICE MANUAL Mack MP10
MACK$29.00
Rated 0 out of 5
- MANUAL SERVICE DEUTZ AGROTRON K 90-100-110-120 Profiline
DEUTZ$35.00
Rated 0 out of 5
INTERNATIONAL ENGINES$31.00
Rated 0 out of 5
FUSO$25.00
Rated 0 out of 5
- SERVICE MANUAL DETROIT DIESEL DDEC VI – Application And Installation Manual
DETROIT$20.00
Rated 0 out of 5
- SERVICE MANUAL BOBCAT 450 453 sms
BOBCAT$50.00
Rated 0 out of 5
- SERVICE MANUAL HINO FD.FE.FF.SG 2011_2013
HINO$34.00
Rated 0 out of 5
- SERVICE MANUAL BOBCAT 974-975 sms
BOBCAT$35.00
Rated 0 out of 5
- SERVICE MANUAL HINO FD.FE.FF.SG 2001
HINO$35.00
Rated 0 out of 5
- SERVICE MANUAL BOBCAT 130 sms
BOBCAT$52.00
Rated 0 out of 5